Skip to content

Shopping cart

Your cart is empty

Continue shopping

The folding stools

STOCKHOLM II svart
Price1 345 KR
Colour+2
5 colours
NEW YORK metallic grey
Price1 550 KR
Colour+2
5 colours
CHICAGO metallic grey
Price1 537 KR
Colour+3
6 colours
SNUPI red
Price1 105 KR
Colour+1
4 colours

The folding stools

STOCKHOLM II svart
Price1 345 KR
Colour+2
5 colours
NEW YORK metallic grey
Price1 550 KR
Colour+2
5 colours
CHICAGO metallic grey
Price1 537 KR
Colour+3
6 colours
SNUPI red
Price1 105 KR
Colour+1
4 colours

FAQ

Frequently asked questions

Can't find the answer? Call +46 499 448 44 or write to us.

Models and dimensions

Which model should we choose?
  • STOCKHOLM II is the original: 53 cm seat height, 1.7 kg and tested for 110 kg. 
  • NEW YORK has a wider base and a more generous seat for longer sessions: 53.5 cm seat height, 2.3 kg and tested for 130 kg. 
  • CHICAGO has a lower seat: 42.5 cm seat height, 1.7 kg and tested for 110 kg. 
  • SNUPI is the smallest and lightest model: 33 cm seat height, 1.5 kg and tested for 110 kg. It is well suited for sitting low, e.g. in educational workshops and guided tours for children.
How much do the stools weigh?
  • STOCKHOLM II and CHICAGO weigh 1.7 kg
  • NEW YORK 2.3 kg and SNUPI 1.5 kg
  • The weight refers to the stool without accessories.
What colours are the folding stools available in?
  • STOCKHOLM II and NEW YORK are available in black, red, yellow, blue, and metallic grey. 
  • CHICAGO is available in the same colours, as well as in white. 
  • SNUPI is available in red, yellow, blue, and white.
Where can I find the dimensions?

Each product page has a Dimensions and materials box with size, seat height, height and weight. The dimensional drawing and product sheet are in the same box.

Safety and durability

What user weight are the folding stools tested for?

The STOCKHOLM II folding stool has been tested and approved by SP Technical Research Institute of Sweden (now RISE), in accordance with ISO 7173:1989 Furniture – Chairs and stools – Determination of strength and durability, for a user weight of 110 kg.

The NEW YORK folding stool has been tested and approved in accordance with the same standard, but for a user weight of 130 kg.

The CHICAGO and SNUPI folding stools are made from the same materials and components as the STOCKHOLM II, but are more compact and are tested for a user weight of 110 kg.

How do the folding stools behave in a fire?

The seat has no padding. Fire safety regulations for furniture apply to upholstered furniture, so the folding stools are not subject to fire testing requirements.

The frame is made of aluminium, which melts at approx. 660 °C. Aluminium can burn, but only at a very high temperature, over 2,000 °C. In a fully developed fire in a room, the temperature after 30 minutes can be approx. 800 °C. In a normal fire, the tubular frame will therefore melt.

Our folding stools are powder-coated. The powder coatings we use are classified as non-flammable and are non-toxic.

The seat is made of a very high-quality polyester composite fabric. In a normal fire, the seat will burn and melt. Our own tests show that it is relatively difficult to ignite the seat with an open flame, in our case a gas burner. The seat burns and melts as long as it is exposed to an open flame. When the flame is removed, the flames go out. However, the seat material is not classified as "non-flammable". It contains no brominated flame retardants, which is better for the environment. 

The material's data sheet indicates an operating temperature of -30 °C to +70 °C.

The plastic parts on the folding stool are made of TPE, Thermoplastic Elastomer. The material is classified as "non-hazardous". The decomposition temperature is 260 °C. In a normal fire these will burn. Just like all other plastics, they will then emit gases and smoke that are toxic. Each stool has very few plastic parts.

How long do the folding stools last?

Used and maintained correctly, they last for many years. There are many museums that have folding stools that are at least 7–10 years old, and even older.

Use and care

Can the folding stools be used outdoors?
  • The folding stools can certainly be used outdoors, but should be stored indoors.
  • If the folding stools are intended for permanent outdoor use, we recommend an extra clear coat to fully seal the powder coating. We offer this at an additional charge.
  • When the folding stools are used outdoors, it is important that they are placed on a flat and stable surface. This is to prevent the folding stool from being unevenly loaded. Extreme uneven loading can, in the worst case, lead to deformation of the lower part of the folding stool.
  • Avoid placing the folding stool on, for example, gravel or sand, as this can scratch the finish around the stool's plastic foot.
How should the folding stools be cleaned and maintained?

If necessary, the folding stools can be cleaned with lukewarm water, a mild detergent and a cloth. Solvents or chemicals must not be used.

If necessary, the friction in the joint can be adjusted. Remove the plastic plug from the joint and adjust the bolt that holds the joint halves together. This requires a 6 mm Allen key and a 13 mm socket wrench.

Can the stool's plastic foot, or the trolley wheels, damage the floor?

Highly unlikely. Both the plastic foot of the folding stool and the trolley wheels have a hardness of Shore A 90. This is as high as hardness can go without compromising comfort and feel. This also means the plastic does not leave marks on the floor.

Can the seat be replaced?

Yes. On STOCKHOLM II and CHICAGO, anyone reasonably handy can do it.

  1. Place the folded stool on a table. It is recommended to cover the table with a tablecloth, bath sheet, or similar to protect both the stool and the table. Note how the seat is positioned – with the seams visible when the stool is folded!
  2. Use a 5 mm Allen key to loosen the screws (2 pcs.) that hold the top brace that goes through the channel in the seat. Hold one end of the brace fixed against the stool's frame tube while you carefully lower the other end of the brace down towards the joint. Do not lift the end upwards, but let it follow the frame tube down towards the joint. A second person may sometimes be needed here to carefully widen the gap between the frame tubes so that the brace does not scratch the paint. Do not use force to widen the gap between the frame tubes! This can cause the joint to crack. The joint is rigid and is not designed to withstand high force in that direction.
  3. Remove the brace from the channel in the seat and set the brace aside. Then turn the stool over and disassemble the other brace in the same way.
  4. The installation of the new seat is then done in reverse order.
  5. Remember how the seat should be positioned – with the seams visible when the stool is folded! Just screw in the seat screws by hand when you put the braces in place.
  6. Only when both braces are in place do you tighten the seat screws with the Allen key.

The seat on NEW YORK can be replaced in the same way, but the frame tubes are thicker so the braces can be harder to remove. The method is not suitable for SNUPI.

Orders and quotes

Can we place a larger order?

Yes. Use Request a quote on the product page, and we will get back to you with the price and delivery time for the entire order.

How long is the delivery time?

For smaller orders, we normally ship within 3–5 working days. The carrier's delivery time to your address will then apply. For larger volumes, the delivery time depends on the quantity and model. Contact us, and we will get back to you with an estimate.

Do you deliver to our country?

Yes, most likely. We have delivered folding stools to museums and organisations in over 50 countries. Within the EU, you can order directly from our online store. Outside the EU, customs duties and import fees may apply. If your country is not available at checkout, or if you are unsure, please contact us and we will prepare a quote including shipping.

Accessories and storage

How do we store the stools?
  • The wall rack holds five or ten stools, and the floor stand holds five. Both are suitable for all our models. 
  • The trolley holds twenty stools, or ten for SNUPI. It has four smooth-running wheels, two of which have brakes, and the arms are covered in rubber to protect the finish.
Do the accessories fit all models?

Wall racks and floor stands fit all our models. The trolleys come in their own size for STOCKHOLM II, NEW YORK and SNUPI, and the STOCKHOLM II trolley also fits CHICAGO.

Manufacturing and warranty

Are the folding stools handmade?

Yes, in a way. We use machinery, but production is not automated, and each stool is assembled by hand. The folding stools are made of aluminium, sometimes called a living material. Despite fixed technical specifications, we may get minor variations in the outcome, which are compensated for with adjustments during production.

Are the folding stools made in Sweden?

Yes. The folding stools are manufactured in our factory in Mönsterås. Since 1995, we have held the exclusive rights to all folding stool models and accessories designed by A&E Design.

Do you offer a warranty?

Yes. 12-month warranty covering defects in materials and workmanship.

Files and documents

Where can we find test reports and certificates?

The Files & Documents page has the SP test reports, our environmental and quality policies and the ISO certificate.

Are there 3D files?

Yes. STEP files for STOCKHOLM II, NEW YORK and CHICAGO, open and folded, are on the Files & Documents page. SNUPI files are available on request.

No questions match. Contact us and we’ll get back to you.

STOCKHOLM II against an outdoor wall, black and white
Contact

Can't find the answer?

Call +46 499 448 44 or write to us, and we will get back to you as soon as we can.

Contact us